2008 Porsche 911
Mileage
220,386
Service Date
5/27/2026
Services Performed
- Remove all control arms for the front and the rear, replace the units with new, replace the inner and outer tie rod ends, chassis torque the suspension.
- Check the system, found the clutch worn, replace the clutch disc, replace the pressure plate, replace the flywheel due to wear, replace the throw out bearing, lube the shaft and road test vehicle to brake in clutch material.
- Perform the alignment after suspension work performed, perform the ride height from previous setup, road test vehicle.
- Remove the old shocks, install new coil overs (client supplied the parts), set up system to address the PASM system, road test vehicle.
- Perform the brake fluid flush, remove the fluid from the master cylinder, remove the fluid from the calipers, top off fluids.
- Check the system, found the front axle boots torn, remove the axles and replace with new.
- Remove and replace the worn engine mounts, check operation.
Carlos V. gave our service a 5 star review on 5/27/2026
